We have already done good research work in different kind of industries for energy saving process. Research is still continuing because it is endless process. We have already found some area for saving in your fuel & electricity bill.

These are as follow

Ø     Very low power factor

Ø     Some motors are working under large variation of load.

Ø     Providing large size motors for providing heavy starting torque.

Ø     Not able to control maximum demand (M.D.) within permissible limit.

Ø     Not able to utilize your contract demand.

Ø     Very heavy heat loss.

Ø     Controlling your process parameters by operating different valves instead of changing speed of motors.

        If you have any above condition in your industry take opportunity to decrease your fuel and electricity bill. Even if you want to know potential of saving, do not hesitate to call us.

       If you are not sure about above condition and if you want to check it then also your service is our pleasure. We are offering energy conservation with very less alteration and comparative very less expense.

Ø     Energy conservation with little payback and saving your capital is our main idea.

THE ENERGY AUDIT REPORT INCLUDES:

Ø     Details of electric parameters, their calculations and graphs.

Ø     Details of possible scope of energy savings.

Ø     Clearly describe the suggestions of possible implementation of energy saving instruments provided by us, practical corrective measures to be taken with clear quantification of likely saving and approximate cost of implantation.

SUPPORT SERVICES AFTER ENERGY AUDIT STUDY:

Ø   Additional information and clarifications during the implementation process.

Ø   Verification of saving after implementation.

Ø   One year free service for our energy saving instruments.

SOME OF THE AREAS COVERED IN AN ENERGY AUDIT ARE:

Ø     ENERGY BILLS:

     Analysis of energy bills, calculations of energy indices, estimation of energy consumption in major energy

     consuming equipments

Ø     ELECTRIC MOTORS:

     Measurement of voltage, current, power factor and power for important loads. A motor rating survey is done

     for important loads.

Ø     MAXIMUM DEMAND  & PEAK TIME CONSUMPTION:

      Explore possibility of load management and power factor improvement to reduce KVA demand and energy

      consumption during peak hours .

Ø     FURNACES/ OVENS/DRYERS:

      Measurement of temperature, estimation of heat balance and efficiency.

Ø     BOILERS:

                Performance assessment of    boiler in terms of efficiency and evaporation ratio by direct and indirect 

                method.

Ø     LIGHTING:

                Measurements of lighting power, luminance and lamp mountings in different work areas.

Ø     PUMPS AND BLOWERS:

       Measurements of pressure power and flows, calculations of efficiencies and piping and ducting system

       losses.

Ø     AIR COMPRESSORS:

                  Estimation of air delivery, specific power consumption (kw/100cfm), leakage level, piping pressure drops,

                  rationalization of proper discharge pressure settings and study of energy consumption in air dryers.

Ø     REFRIGERATION AND AIR CONDITIONIG:

      Measurement of temperatures, relative humidity, pressure, estimation of water /brine/air flows and

      estimation of specific power consumption (kw/ton).